Description USES MTop 100 Grey V1 is ideal for a variety of applications, including: Concrete and Masonry: Coating and repairing surfaces like walls, floors, and ceilings in both residential and commercial buildings. Industrial Environments: Protective coating for floors, walls, and ceilings in factories, warehouses, and workshops. Exterior Applications: For use on outdoor structures, providing protection against harsh weather conditions and environmental factors. Renovation: Used in the renovation of old concrete surfaces, providing a fresh, durable finish. Waterproofing: Can be applied as a part of a waterproofing system for areas prone to moisture. FEATURES Durability: Designed for high abrasion resistance, making it ideal for high-traffic areas. Weather Resistance: Offers excellent protection against environmental elements such as rain, UV rays, and temperature fluctuations. Aesthetic Appeal: Smooth, uniform grey finish that enhances the visual appeal of the surface. High Adhesion: Superior bonding properties ensure long-lasting performance on various surfaces including concrete, plaster, and masonry. Non-Shrinking: Ensures a solid, stress-free bond and finish that does not shrink after application. Chemical Resistance: Resistant to mild chemicals, oils, and grease, maintaining its integrity in industrial environments. Easy Application: Can be applied by brush, roller, or spray, providing flexibility depending on the scale of the project. PRODUCT INFORMATION Product Name: MTop 100 Grey V1 Appearance: Smooth, matte finish in grey Packaging: 25kg bags (available in other sizes upon request) Shelf Life: 12 months from date of manufacture if stored in original packaging Storage Conditions: Store in a cool, dry environment, away from direct sunlight and extreme temperatures. Ensure the packaging remains sealed to avoid contamination. Application Temperature: 5°C to 35°C (41°F to 95°F) Mixing Instructions: Mix with water as per product specifications (water-to-powder ratio typically provided on packaging) Thinner: Water (if required for adjusting viscosity) TECHNICAL INFORMATION Density: Approximately 1.4 – 1.6 kg/L (depending on application) Viscosity: Medium viscosity for ease of application Coverage: 1kg covers approximately 2-3 m² depending on surface texture and application thickness Drying Time: Touch dry in 1-2 hours; fully dry within 24 hours at 20°C (68°F) Curing Time: Fully cured after 7 days under standard conditions Compressive Strength: ≥ 30 MPa (after 28 days) Flexural Strength: ≥ 7 N/mm² (after 28 days) VOC Content: < 50 g/L (Compliant with environmental regulations) APPLICATION INFORMATION Surface Preparation: Ensure that the surface is clean, dry, and free from any loose particles, dust, oil, or grease. If necessary, use a suitable cleaner or degreaser to remove contaminants before application. For optimal bonding, repair any cracks or surface imperfections before applying the coating. Mixing Instructions: Mix MTop 100 Grey V1 with the recommended amount of clean water to achieve a smooth, lump-free consistency. Adjust the water content slightly if needed to achieve the desired workability. Application Method: Brush or Roller: Apply evenly with a brush or roller for smaller areas or fine finishes. Spray: Use a spray application method for larger surfaces to achieve a smooth and uniform coat. Multiple Coats: Apply multiple coats if necessary, allowing adequate drying time between each coat (typically 4-6 hours). Drying and Curing: Allow the first coat to dry for 1-2 hours before applying the second coat. Full curing is achieved after 7 days under standard conditions. Cleanup: Clean tools and equipment immediately after use with water, before the material dries. Once the coating has dried, solvent-based cleaners may be required for cleanup. Precautions: Always apply in well-ventilated areas to avoid inhaling vapors. Use appropriate personal protective equipment (PPE), such as gloves and safety glasses, during application.
