Product Description Thermoguard Asbestos Encapsulating Smoke & Flame Retardant Coat 50m² seals rigid, sound asbestos located within buildings which are NOT: subject to mechanical damage; in concealed locations or in difficult to access areas. It can also be used to seal in isolated asbestos fibres which may remain after a primary asbestos removal project. Encapsulates asbestos fibres, in order to prevent their release into the atmosphere. Will bond residual asbestos fibres to then surface, after primary removal. Suitable locations to use Thermoguard Asbestos Encapsulating Smoke & Flame Retardant Coat include: internal wall panels; top and underside of ceiling panels; rigid internal ducts or pipework and external wall sheets, fascia or soffits. Seals isolated asbestos fibres Prevents asbestos release Permanently bonds asbestos fibres Asbestos encapsulating SFR coat comes in eggshell/matt finish and can made to RAL and BS colour codes. A Fire Certificate can be provided for non-combustible surfaces after confirmation of application (Please contact us for more details). Safety precautions must be followed, please refer to instructions or manufacturer for further information. Please also refer to HSE Asbestos Guidance When using this coating, wear disposable full-body hooded overalls, plastic shoe covers, plastic gloves, goggles & sealed mask with fine dust particle filters. All of these can be obtained from Palatine Paints – click here, give us a call or use the online chat facility. Before purchasing any intumescent coatings or related products from Palatine Paints, it is essential to contact our technical support team to obtain a project-specific specification and expert guidance. The information provided is intended for general guidance only and should not be relied upon as a substitute for professional advice. Palatine Paints accepts no liability for any damage to property, risk to human life, or financial loss resulting from incorrect specification, surface preparation, application, or ongoing maintenance—particularly where such issues arise due to failure to consult our technical team. This includes, but is not limited to, negligence by the purchaser or applicator, or failure to follow the recommended procedures and advice. Please Note: Thermoguard products are exempt from Palatine Paints’ standard returns policy. Returns are only accepted if the product is faulty. Thermoguard do not accept returns for any other reason, including change of mind or incorrect ordering.
