Description WHERE TO USE Sikafloor®-261 CA should be applied by experienced professionals in the following areas: Clean rooms and sanitary areas Commercial and industrial facilities Food service environments Institutional and recreational areas Light to medium-duty manufacturing spaces Processing and storage facilities Retail stores Theaters Aircraft hangars CHARACTERISTICS / ADVANTAGES Strong mechanical and chemical resistance Glossy finish that enhances aesthetic appeal Durable, seamless, and impermeable surface Easy to clean and maintain Prevents bacterial and fungal growth Neutral odor Wide range of colors available, with no minimum order required High resistance to fungi (ASTM G21) and mold growth (ASTM D3273) ENVIRONMENTAL INFORMATION Conforms to LEED®v4 MR Credit (Option 1): Environmental Product Declarations Meets LEED®v4 EQ Credit: Low-Emitting Materials Complies with LEED®v4 MR Credit (Option 2): Material Ingredients and Sourcing of Raw Materials APPROVALS / CERTIFICATES Meets CFIA and USDA requirements for use in food plants PRODUCT INFORMATION Packaging: Available in 10 L and 30 L (2.6 and 7.9 US gal.) units Shelf Life: 2 years when stored in unopened packaging Storage Conditions: Store in a dry environment at temperatures between 5°C and 32°C (41°F to 89°F) Appearance/Color: RAL 7038 Agate Grey, RAL 7030 Stone Grey, RAL 7046 Telegrey 2, RAL 7012 Basalt Grey (custom colors available upon request) Viscosity: ~550 cps (A B mixed) VOC Content: < 50 g/L TECHNICAL INFORMATION Shore D Hardness: ~76 (ASTM D2240) Abrasion Resistance: ~0.11 g (CS17/1000 cycles, 1000 g) (ASTM D4060) Impact Resistance: ~5.88 joules (ASTM D2794) Indentation: ~8.82% (MIL-PRF-24613) Compressive Strength: ~56 MPa (ASTM D695) Tensile Strength: ~7.4 MPa (ASTM D638) Elongation at Break: ~22% (ASTM D638) Pull-Off Strength: > 2.5 MPa (ASTM D7234) Thermal Expansion: ~1.27 x 10^-4 mm/mm/°C (ASTM D696) Friction Coefficient: ~0.32 wet, ~0.93 dry (ANSI A137.1 / ANSI A326.3) Service Temperature: Minimum 0°C (32°F), Maximum 50°C (122°F) Water Absorption: ~0.3% (ASTM D570) Fire Resistance: 0 (FSR) Flame Spread Rating, 15 (SDC) Smoke Development Classification (CAN/ULC S102.2) APPLICATION INFORMATION Mixing Ratio: A:B = 2:1 by volume Consumption: Prime coat: 5 m²/L to 8 m²/L (200 ft²/US gal. to 325 ft²/US gal.) at 5-8 mils WFT Wear coat: 1.6 m²/L to 3.3 m²/L (65 ft²/US gal. to 135 ft²/US gal.) at 12-25 mils WFT Refresher coat: Apply at the same rate as wear coat Product Temperature: Condition product between 18°C to 30°C (65°F to 86°F) before use Ambient Air Temperature: Minimum 10°C (50°F), Maximum 30°C (85°F) Relative Air Humidity: Maximum 85% during application and curing Substrate Temperature: Minimum 10°C (50°F), Maximum 30°C (85°F) Pot Life: At 10°C (50°F): ~60 minutes At 20°C (68°F): ~40 minutes At 30°C (86°F): ~15 minutes Open Time on Substrate: At 10°C (50°F): ~80 minutes At 20°C (68°F): ~50 minutes At 30°C (86°F): ~35 minutes
