Description USES Sikafloor®-100 Level SA can be applied manually or via a pump to level floors with a thickness between 2 mm and 10 mm, before the final floor covering, such as ceramic or stone tiles, linoleum, PVC, wood, or carpet. Ideal for leveling both large and small surfaces in commercial, residential, and domestic spaces. It is especially recommended for use with Sikabond® elastic bonding products, SikaCeram® tiling mortars, or Sikafloor systems under foot traffic. CHARACTERISTICS / ADVANTAGES Quick application due to excellent flow and cohesion of the fresh material Easy to apply by pump or manually Low tension and excellent compaction Strong adhesion and bond Fast setting and quick drying properties PRODUCT INFORMATION Composition: Polymer-modified Portland cement and graded aggregates Packaging: 25 kg bags Appearance/Colour: Grey powder Shelf Life: 6 months from the production date Storage Conditions: Store in dry conditions in original, undamaged, sealed packaging at temperatures between 5 °C and 35 °C. Protect from heat, direct sunlight, and moisture. Density: ~2.05 kg/l (fresh mortar) Bulk Density: ~1.3 kg/l TECHNICAL INFORMATION Compressive Strength (23 °C): 1 Day: ~10 N/mm² 7 Days: ~20 N/mm² 28 Days: ~28 N/mm² (ASTM C109) Tensile Strength in Flexure (23 °C): 28 Days: ~8.5 N/mm² (ASTM C580) Tensile Strength (23 °C, 28 Days): ~6 N/mm² (ASTM C307) APPLICATION INFORMATION Mixing Ratio: 5.25 to 5.5 L of water per 25 kg bag Consumption: ~1.6 kg/m² per mm thickness (dry material, without water) Layer Thickness: Minimum 2 mm, Maximum 10 mm Ambient Temperature: Minimum 10 °C, Maximum 35 °C Relative Humidity: Maximum 75% Substrate Temperature: Minimum 10 °C, Maximum 35 °C Substrate Pre-Treatment Priming: Sikafloor®-01 Primer: Dilute 1 kg of Sikafloor®-01 Primer with 3 L of water, apply with brush or roller. Approximate consumption: 70 g/m² (210 g/m² when diluted). Sika® Astar: Apply undiluted with brush or roller, approximate consumption: 0.1 – 0.2 kg/m². Pot Life: Approximately 30 minutes at 23 °C and 50% relative humidity Waiting Time / Overcoating Sikafloor®-100 Level SA can be covered with textile or elastic floorings after the following waiting times: For ≤ 3 mm: ~24 hours For ≤ 5 mm: ~48 hours For ≤ 10 mm: ~72 hours These values are approximate and may vary depending on climate conditions. Ensure the moisture content is within the required limits before covering. Applied Product Ready for Use Foot Traffic: Approximately 8 hours at 23 °C and 50% relative humidity Fully Cured: Approximately 7 days These times are estimates and may vary depending on the substrate and environmental conditions, particularly temperature and humidity.
