Description USES MEmaco 8100 AP V1 2x1L 4G is a versatile, fast-setting repair mortar designed for use in: Repairing and resurfacing concrete structures Patching holes, cracks, and surface imperfections Repairing exposed concrete surfaces in industrial and commercial environments Suitable for use on floors, walls, and ceilings Ideal for use in both indoor and outdoor applications, including areas exposed to light traffic or harsh weather conditions FEATURES Rapid Setting: Quick curing time allows for faster repairs and minimal downtime. High Strength: Provides excellent bond strength to concrete and other construction materials. Durable: Resistant to abrasion, impact, and harsh weather conditions. Easy to Apply: Smooth consistency for easy mixing, application, and finishing. Weather and Water Resistant: Performs well in both dry and wet conditions, ensuring long-lasting results. Non-Shrink: Ensures no volume loss during the curing process. Adhesion to Multiple Substrates: Effective bonding to concrete, stone, and masonry surfaces. PRODUCT INFORMATION Composition: Modified cement-based mortar with advanced polymer additives Packaging: Supplied in 2 x 1L containers (2-component system) Shelf Life: 12 months from the production date when stored in the original, sealed packaging Storage Conditions: Store in a dry, cool place between 5°C and 30°C, away from direct sunlight and moisture. Appearance and Color: Grey, with a smooth, paste-like consistency Density: Approximately 1.8 kg/L (when mixed) TECHNICAL INFORMATION Compressive Strength: ≥ 30 N/mm² (24 hours at 25°C) Tensile Strength: ≥ 8 N/mm² (24 hours at 25°C) Flexural Strength: ≥ 10 N/mm² (24 hours at 25°C) Application Temperature: Minimum: 5°C / Maximum: 40°C Setting Time: Initial set: 15-30 minutes at 25°C Final set: 45 minutes at 25°C Water Demand: 20-25% by weight, depending on the consistency required APPLICATION INFORMATION Surface Preparation: Clean and prepare the substrate by removing dust, oil, grease, and loose material. Abrade the surface to ensure proper adhesion of the repair mortar. Mixing: Mix the two components (liquid and powder) in the recommended ratio until a smooth, lump-free consistency is achieved. Application Method: Apply the mortar using a trowel, spatula, or putty knife, pressing firmly into cracks or holes. Smooth the surface to the desired finish. Curing: Allow the repair to set and cure. Protect the area from direct sunlight or rapid temperature changes during the curing period. Cleaning: Clean tools and equipment with water immediately after use. Once the product has set, it may be difficult to remove.
