MSeal P 101 Universal Silane-Modified Primer | MCTCHEMICALS | MASTER BUILDER SOLUTIONS

Description USESSika® Primer-101 (formerly MSeal P 101) is suitable for preparing both porous and non-porous surfaces, including concrete, brick, stone, asbestos, wood, stainless steel, and ceramics. CHARACTERISTICS / ADVANTAGES Easy to apply Low viscosity PRODUCT INFORMATION Chemical Base: 1-component, solvent-based modified silane Packaging: 750 ml can Shelf Life: 12 months from production date Storage Conditions: Store in original, unopened packaging in dry conditions at temperatures between 5°C and 35°C. Protect from direct sunlight, heat, and moisture. Color: Clear TECHNICAL INFORMATIONAPPLICATION INFORMATION Yield: ~ 20 m²/L (theoretical coverage) Ambient Air Temperature: Minimum 5°C / Maximum 40°C, 3°C above dew point Substrate Temperature: Minimum 5°C / Maximum 40°C BASIS OF PRODUCT DATAAll technical information in this data sheet is based on laboratory tests. Actual results may vary due to factors beyond our control. FURTHER DOCUMENTS General Method Statement (GMS) LIMITATIONS Flammable or highly flammable liquids. Do not apply near open flames or while smoking. Wear protective gloves and goggles. Use in well-ventilated areas and avoid inhaling vapors. In case of narcosis from inhaling concentrated vapor, move the person to fresh air and seek medical assistance. If the product comes into contact with eyes, rinse thoroughly with clean, cold water for at least five minutes and seek medical attention. In case of fire, extinguish using carbon dioxide, dry chemical, or foam fire extinguisher. Due to its penetrating and sealing properties, Sika® Primer-101 (formerly MSeal P 101) may cause staining on materials like granite, marble, natural stone, and man-made composites.